MIG Vs TIG Welding
MIG welding of Tungsten Arc Welding is often an important question that most new welders ask. Both are excellent skills to possess in your arsenal, but there is a very good chance that you will find that you lean more towards one than the other. As always said, it’s always better to be skilled with both as many different welding processes as possible.
If you do decide to learn both of them, you should know that they are both pretty much the same type of weld. They both use a heat source to melt the metal and fuse it. The only major difference that exists between these two is the electrode used. Both electrodes have an arc when they are struck, but one uses a larger arc while the other has a smaller one.
While TIG welds do have a large arc, it’s generally not at the point that a MIG does. You will generally find that it takes longer to get the right heat from the electrode to get the metal to fuse with ease. This is not necessarily a bad thing though, especially if you are learning to weld on a beginner’s level. If you are going to learn the basics of TIG welding, then this may help you a little bit along the way. You are less likely to want to do some welding on a job site with a high-grade arc that will blow out all over the place.
While the primary difference between MIG and TIG is the electrode that is used, both are used in the same process to make the weld. There is also a slight difference in the size and shape of the electrode. This is important because it will affect how it heats the metal. The larger the electrode is, the more heat it can generate.
The size and shape of the electrode that is used in MIG and TIG are what make the welding process so unique. Because they are so different, these two welding methods will typically do a good job of getting the best out of the metal. They are also much less likely to burn through the metal at the edges and corners of the piece.
It is important for anyone who is going to get into welding to take the time to understand the differences between both of these types of welding. You will most likely find that if you learn about them before going in, you will not regret having learned them. and you will enjoy working with them on a day to day basis. Even if you aren’t comfortable with both types of welds, you’ll find that you will find it difficult to do with only one or the other.